Diverter
Our Diverter creates a new set of opportunities for rainwater collection. It intercepts the water from your down pipe, occupies no ground space at all and is perfect for sites where a tank just won't fit or would interfere. They go completely unnoticed when mounted above head height. The Diverter screens leaves and first flushes the water, then develops head pressure, allowing the clean water to be transported at up to 2000 l/hr, via a line as small as 20 mm, to a tank located in a more desirable position. Special features:
Our Diverter creates a new set of opportunities for rainwater collection. It intercepts the water from your down pipe, occupies no ground space at all and is perfect for sites where a tank just won't fit or would interfere. They go completely unnoticed when mounted above head height. The Diverter screens leaves and first flushes the water, then develops head pressure, allowing the clean water to be transported at up to 2000 l/hr, via a line as small as 20 mm, to a tank located in a more desirable position. Special features:
- Leaf Screen
- First Flush function
- Sends water to storage tanks via poly line at ground level
- When storage tanks are full, the Diverter sends overflow water into existing down pipe
- UV-stabilised food grade polyethylene
- Standard range of colours
- Includes a steel mounting bracket.
510mm H x 300mm W x 240mm D
Obtain price
Available: Sydney and Melbourne
- The bottom of the Diverter must be at least as high as the overflow point in the tank;
- If no overflow is being used on the tank, a float valve must be used on tank;
- If tank has an overflow to storm water, the entry point can be at any height of the tank;
- Cut and remove section of down pipe approx. 900 mm high;
- Centre the mounting bracket approx. 300 mm below the top section of down pipe;
- Mark and drill appropriate holes accordingly. Fix bracket to wall and remove wing nuts & washers;
- Hold the Diverter in position with overflow pipe slotted slightly into lower section of down pipe;
- Make sure diverter is level;
- Mark and drill bracket hole screws on back of Diverter;
- Choose left or right outlet on underside of Diverter and drill out. After drilling make sure all plastic swarf is removed from inside the Diverter;
- Remove leaf screen housing for installation of Diverter;
- Drill hole on downpipe and insert the clear tube.
Mosman: 2 x Diverters
Maintenance- Your Diverter should be checked periodically (after cleaning once or twice you will work out roughly how often your device needs to be cleaned);
- Unscrew fitting (attached to clear hose) from bottom of the unit;
- Remove white mesh filter from inside;
- Rinse filter and the washer with small hole found at the end of the hose tail fitting;
- Replace filter and fitting (with washer inserted) and insert the clear hose back into storm water overflow.
Save water - Help the environment - Add value to your property.
Aquarius Watermaster, 287 Mona Vale Rd, Terrey Hills 2084